TMotor Anti 9x3 Carbonphantom_new_center_board8jsmallzenmuse-h3-2dsmallphantom pro closePhantom pro with radioLilliput 664W IPS LED FPV Monitor


$2,649.98$2,849.98 $2,349.98$2,549.98

Select Radio

Clear options


Out of stock

Product Description

Go Professional with ProFotouav’s exclusive custom DJI Phantom Pro RTF Quadcopter. Our flagship Phantom is packed with extras. We take the original Phantom’s and upgrade them with high quality components for the ultimate flying experience. All components are thought out and professionally installed. ProFotoUAV takes pride and delivers products with only the highest standards and attention to detail. Looking for the ultimate RTF Phantom? Than the Phantom Professional line is for you.


Product Highlights:

-Ready to fly out of the box! Attach the propellers, your Hero 3 (Not included) and start filming!

-Upgraded to the V2 Naza Controller and GPS for the most stable flight experience

-The Phantom radio is replaced by Futaba’s very popular T8J 8 Channel radio system or 8FG SUPER.

-T8J or 8FG programmed for gimbal tilt function. Have more control over your shots. We use the Futaba receiver not the phantom upgrade receiver.

-Upgraded Quality T-Motor set. More reliable and higher efficiency than the original phantom motors.

-Integrated Main board replaces the PMU and H3-2D Controller, reducing weight and increasing flight times!

-Custom Water Jet cut military grade hard case from GoProfessional. Fits your Phantom, Radio, 6 Batteries, fatshark goggles,GoPro, and more!

-Installed quality FPV system with 7″ LED IPS Monitor

-250mw Fatshark  5.8Ghz Video Transmitter





The included Futaba 2.4 GHz 8J Radio offers more functionality, reliability, and range. Use the VR control for Gimbal tilt, Customizable switches, Supports AA batteries or optional Lipo pack, Can be used with your other Heli’s and Planes, Reliable S-FHSS channel switching system.


DJI NAZA-M V2 Controller brings the latest functionality to the phantom. Compatible with the latest firmware updates and H3-2D Ready.


All-in-one Design

DJI adheres to continuous innovation and improvement. With the new firmware, new attitude stabilization algorithm and optimized hardware structure, the Naza-M V2 provides better flight performance. The innovative All-in-one design simplifies installation and saves space and weight. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small Main Controller.

Advanced & Improved Attitude Stabilization Algorithm

The latest fourth generation attitude stabilization algorithm not only inherits the outstanding flight stability of DJI products, but also provides excellent maneuverability even without the GPS module. It is more flexible and stable, and gives the hobbyists a wonderful flight experience. New features have been included such as GPS course automatic compensation, GPS & Compass sensor calibration, new take-off mode and so on.



GPS Module Available/Accurate Position HoldThe plug and play GPS module will greatly enhance the performance for Aerial Photography with accurate Position Hold, Return-To-Home and Intelligent Orientation Control functionalities. With the GPS Module, the multi-rotor will have position and altitude locked accurately even in windy conditions. Hovering accuracy is approximately 2.5m horizontal and 0.8m vertical.



Our Professional series Phantoms come with 2214-11 High Performance T-Motor’s. The Anti-Gravity T-Motors are made with quality components and Japanese bearings. The quality motors are high efficiency and more reliable. The nice white finish give the Phantom a sleek integrated look.



Looking for a High quality replacement propeller for you DJI Phantom? Look no further. These new AntiGravity Carbon props form T-Motor are some of the finest! These props are stronger and more ridged and far superior to the factory plastic propellers. The new 9×3 prop size was carefully selected to achieve the maximum thrust without loosing efficiency. Get a Black and white orientation set or go all white for a sleek look. These props are sure to impress.





The DJI ZenmuseH3-2D Gimbal is another milestone in gimbal innovation, which is designed for the GoPro Hero3. With its high precision, high stability, lightweight, plug and play features, it is widely used in film and television productions, advertising aerial photography, etc. Even if the aircraft is in high-speed flight, it can still stabilize and control the GoPro camera precisely with the highest stability. The precision of control angle is within the range of ±0.08°, so picture or video output can reach the best quality.The H3-2D gimbal inherited the core algorithm from the Zenmuse Z15 gimbal and the unmanned aircraft flying attitude stability control algorithm. Combined with the high precision sensors and brushless motors, the DJI Zenmuse H3-2D gimbal provides pixel level stabilized footage.




Our custom Phantom Pro’s come with a complete FPV system. See what the camera sees! Compose your shot’s on a beautiful industry leading 7″ LED IPS display. Most aerial shoots will be preformed in direct sunlight washing light and glare across the monitor. This can make for tricky FPV flying and can be very distracting. Our 7″ high brighness LED display help combat washout images. The monitor also includes a sunshade to additionally block light. Because our monitor uses IPS technology, you will have no troubles viewing at any angle. The installed immersion RC 600mw video transmitter will give you the range  to get those amazing shots! The video signal is broadcasted straight into the 7″ monitor. No need for additional receivers and clutter behind your monitor. Like all our RTF systems the components are professionally installed and ready to use.







Protect you investment with a custom cut case for the Phantom Pro. Drop-Proof and weather Proof, rest assured you Phantom Pro and accessories will be safe.




-DJI Phantom RTF Quadcopter

-Futaba 8J 2.4GHz Digital Radio

-DJI NAZA V2 Controller + GPS

- DJI Phantom Upgrade Main Board

-Zenmuse H3-2D 2 Axis GoPro Hero 3 Brushless Gimbal with tilt

-7″ LED IPS FPV Monitor with built in 5.8Ghz receiver (No Blue/Black screen)

-2500mah battery for 664 LED monitor

-Fatshark 250mw Video TX (Installed)

-FPV accessory mounting plate. Put’s the FatShark TX in a good position for reception and airflow.

-T-Motor Anti-Gravity High Performance Motors

-T-Motor Anti-Gravity Carbon Props 9×3 (All White)

-Custom cut professional hard transport case ( GoProfessional)

-3x 2200Mah LiPo Batteries (GensAce or Hyperion dependant on stock)

-SkyRc 120V Battery Charger

-4″ Adjustable wrench with rubber coating to protect prop nut finish

-4x Spare DJI Props

-4x AA Batteries for Radio

**Please Note we need at least one day to install the Futaba radio RX and test prep for shipment. Units in stock are pre-built aside from the radio installation**


Additional Information

Weight 9 kg
Dimensions 54 x 44 x 24 cm
Categories: , . Brands: .


There are no reviews yet.

Be the first to review “DJI PHANTOM PRO”